VALOR AUDIO VPA404 - Car Amplifiers

Applications:

* (4) full range speakers
* (8) full range speakers
* (2) Subwoofers
* (4) full range speakers + 1 Subwoofer

Why this 4 channel amp is a great choice:

Built in high and low pass crossovers
This amplifier will last a really long time! They will also make your speakers and your subs last a really long time. The 1st 4 channels of the amp has a high pass crossover filter built in. That means it will only allow highs and mids to come out of your 4 speakers. You can set the exact frequency to your taste. This will protect your speakers because they will not play any sounds they were not meant to play. This will prevent them from distorting, and this will prevent them from blowing. (Distortion causes speakers to blow).

The mono channel has a built in low-pass crossover. The low pass crossover is going to only allow deep bass to play out of your subs. Again, this crossover is also adjustable so you can set the frequency to your taste. This will make your subs sound good and prevent them from getting damaged.

600w RMS!
This amp has a huge amount of power! The amp pushes 150 watts RMS to each channel. Don't be fooled by other brands who wite bogus peak ratings, these amps put out what they say they will!

High and Low Level Inputs
High and low level inputs give you the ability to wire up the amplifier, even if you do not have enough pre-amp outputs. You can get the signal from one of your speakers and wire the speaker to the high level input. The signal from the amp will run through the speaker to your receiver. (If you have pre-amp outputs than you do not use this method).
To explain this in easier terms. This amplifier can be wired to a stock stereo system or to an aftermarket stereo.

Best Value
I guarantee you can not find any amp with this much power and from a trusted brand name like Valor for this price!

Full 2 Year Warranty!
Our company strives to provide the best service, which is why we are offering a full 2 year warranty.

Features:

* 1000 Watt MAX 4-Channel Amplifier
* 4 x 100 Watts RMS @ 4 Ohm
* 4 x 150 Watts RMS @ 2 Ohm
* 2 x 500 Watts MAX @ 4 Ohm
* Frequency Response: 20Hz - 40KHz
* Dimensions (L x D x H) 10.25" x 10 1/8" x 2 1/8"
* Class A/B Mosfet Circuitry
* 3-Way Circuit Protection
* Power and Protection Mode LED Light
* Adjustable Gain Control
* Built In Low Pass & High Pass Filter Crossovers
* Low and High Level Inputs
* Signal to Noise Ratio: 102dB
* Bridgeable

38%

Details


SKU	VPA404
Quantity in stock	6 item(s) available
Weight	10.00 lbs
Price:	$97.95

Options

Quantity

Add to cart

Add to wish list